Technical data:
• Appearance: Transparent
• Odor: Aromatic
• Solid content: 30%-35%
• Hardness after curing: 65-80A
• Surface dry time: 3 minutes
• Full cure time: 24-48 hours
• Storage: Store at 10-28°C
Instruction:
1. Carefully read the product description before using;
2. Do a small area test before using on large area;
3. To make sure the bonded surfaces are clean and dry;
4. The recommended operation temperature is 18-32°C;
5. Directly open the lid of this tube to extrude glue and coat on bonded surfaces evenly;
6. After 1-2 minutes, to align the two surfaces and bond together with pressure;
7. After 48 hours to have the best adhesion strength;
8. After use, remove the residue adhesive near stitch and close the cap tightly.